Polybag and export carton
A polybag per bottle for bulk export, or a printed OPP bag where the bottle sells loose, then 40 to 60 pieces in a printed carton with the barcode and shipping marks outside.
Packaging decides what your buyer opens and what their customer sees on the shelf. We spec the polybag, OPP bag, printed colour box, rigid gift box, kraft box or shrink sleeve against the bottle, then pack 40 to 60 pieces into a 5-ply export carton. Artwork is proofed before printing, and cartons are checked to AQL 2.5.
Three failures account for most damage claims on a water bottle container. Cartons collapse at the bottom when the board is downgraded to save a few cents, so the lowest row carries the load for the whole sea leg. Bottles abrade against each other when the polybag is too thin, which dulls a powder coat to a matt grey. Lids crack when the shoulder of one bottle lands on the cap of the next.
We pack to prevent all three rather than repack after a claim. Each bottle goes into a polybag or a printed OPP bag, cartons are 5-ply with a partition or a moulded pulp tray, and the lid is either bagged separately or protected by a cardboard shoulder pad. The count is 40 to 60 pieces per carton depending on the model.
The pack has to match the sales channel: bulk export in a carton, retail-ready on a shelf, or a gift programme where the box is the product.
A polybag per bottle for bulk export, or a printed OPP bag where the bottle sells loose, then 40 to 60 pieces in a printed carton with the barcode and shipping marks outside.
A printed colour box or a plain kraft box with one print colour, die-cut to the bottle, carrying the recycling mark, the capacity in litres and a barcode on the base.
A rigid gift box with a pulp insert and a shrink sleeve around the bottle, used where the box is the product. Quoted as its own line, never buried in the piece price.
A retailer rejects a carton for reasons that have nothing to do with the bottle: the barcode will not scan at the till, the warning text is in the wrong language, or the recycling mark is missing from the base. We hold the dielines and set the barcode, batch code, capacity in litres and material mark at proof stage rather than at packing.
Proofing runs in three passes. You approve a flat PDF with the dieline and bleed, then a digital print on the actual board, then a photo of the first box off the line beside the approved sample. Nothing prints until the third pass is signed, which is what usually stops a reprint after the container has been booked.
Four configurations, each with a carton count and a label position already on file for the reorder.
Polybag with desiccant, carton of 48
Body and lid bagged together, not loose
Colour checked against the signed sample
Rigid box, printed sleeve, 40 pcs per carton
Send your specification, quantity and target market. We reply with a quotation, a sampling date and the carton count within 12 working hours.