Body and lid
Pick a 304 or 316L vacuum body, a PP or silicone lid and a stock colour. That pairing decides the carton, the piece price and the delivery date.
Private label means the bottle is already engineered and the brand is yours. Pick a body from 180+ moulds, choose a stock colour, then put your logo on the body, the lid or the gift box. Ordering from an existing mould removes the tooling charge, keeps the minimum at 500 pieces and puts sampling at 7 to 10 days.
Three surfaces can carry a brand: the body, the lid and the retail carton. Printing the body is the most visible and the only one a buyer sees in use; a colour-matched lid adds a second hit of brand colour without a print pass; the carton is the cheapest surface and the only one you can change without touching production. Most first orders use two of the three.
Because the mould already exists, a private label run carries no tooling charge and the first sample is a production bottle with your artwork on it, not a hand-built prototype. Stock colours start at 500 pieces per style. A custom Pantone matched to your brand guide pushes the minimum to 1,000 pieces, because the powder coat batch is mixed for that order alone.
Settle these before artwork and the remainder of the order is execution rather than negotiation.
Pick a 304 or 316L vacuum body, a PP or silicone lid and a stock colour. That pairing decides the carton, the piece price and the delivery date.
Silk-screen for spot colours, laser engraving for a permanent mark in bare steel, or a water-transfer wrap where the artwork has gradients.
Polybag, colour box or rigid gift box, with the barcode, batch code and market label printed in-house before the carton is sealed.
A silk-screen or UV print job starts from vector artwork with fonts outlined. We lay the logo on the flat development of the bottle rather than on a photograph of one, mark the print position in millimetres from the base, and return a proof at actual size. Nothing is printed until you sign that proof, which prevents a container of bottles with a logo half a turn off centre.
Pantone matching is a separate decision from printing. A custom powder-coat colour is mixed for the batch, so it needs the 1,000-piece minimum and an approved colour chip before the coating line starts. A stock colour has its chip on file and runs at 500 pieces. Laser engraving skips colour altogether: the mark is the steel itself, so it survives handling and repeated cleaning.
Two dates set the schedule: sampling at 7 to 10 days, then production at 15 to 20 days from approval.
A body reference, the quantity, the colour and the artwork. A costed quotation and a sampling date come back within 12 working hours.
Proof at actual size with the logo position marked, plus the carton dieline if the bottle ships in a printed box.
One to three decorated production bottles in 7 to 10 days, or 3 to 5 days when a stock sample already works.
The run takes 15 to 20 days from 500 pieces, with print and colour checked against your signed bottle each shift.
AQL 2.5 inspection with a photo report, 40 to 60 pieces per 5-ply carton, then FOB Shenzhen or Yantian.
Each of these uses an existing mould, so the only new cost was decoration and packaging.
Rigid box, printed sleeve, 500 ml bodies
Mug and lid in the same Pantone as the body
Lid, gasket and thread from one tool
Label applied in the same run as the body
Artwork files, lids, colourways and the record we keep.
Send your specification, quantity and target market. We reply with a quotation, a sampling date and the carton count within 12 working hours.